Recent content by jaffabaffa

FZ6-S on the Stelvio in 2.7K and 60fps Both sides up and down. No slow sightseeing. Only spirited/sporty riding + police pull over

Hey guys! Do any of you happen to know if the pitch of the M12 rear brake caliper bolt is 1,00 or 1,25 or 1,50 (or something else)? I need to buy a tap to repair the thread in the brake caliper, so I need to be absolutely sure I use a tap with the right pitch. Many thanks!

The speedometer is indeed already quite far of in stock form. If you shorten the gearing ratio, the difference becomes even bigger. I would definitely recommend a SpeedoHealer, even if your gearing is still original. Your odometer won't count the miles/kilometers as quickly, and your speedometer...

I don't have anything to compare it to. It was just for fun. The information (the chart) might not be particularly informative or useful, but some people (including myself) might still find it interesting to look at or analyse. For anyone wondering, these are the only mods that might impact...

Dyno run! Including flames 2004 Yamaha FZ6-S (FZ6 Fazer) 93,4 hp at 12.800 rpm 55,5 Nm at 10.500 rpm Measured at the real wheel See attached pdf file for the dyno chart Video URL to Facebook group: https://m.facebook.com/groups/325136184262932/permalink/5603291259780705/

Yes, it also came with that tiny red button. I installed that cable afterwards, hence it's not in the pictures

Hey guys, Thanks for all your comments. I have since successfully installed the SpeedoHealer. I must say that the instructions that come with the SpeedoHealer are actually very clear and straight forward. The only difficulty that an unexperienced person might encounter while installing a...

Hey guys! I recently bought a HealTech SpeedoHealer v4 that I'm planning to install in the near future. Because I use my FZ6 as my main means of transportation to commute to and from work every day, I would like to complete the installation process in one go, and not stubble upon any...

Hey FazedOut777, Perhaps the last couple of posts in this old topic can provide the answers you're looking for: https://www.600riders.com/threads/desperate-for-help-bike-starts-stuttering-after-a-while-repairs-itself-by-turning-engine-off-and-on-again.59931/page-3#post-649108

Thanks again, Gary! You're right... To my big surprise, buying the bearings separately is actually more expensive than buying a dedicated FZ6 bearing kit... Anyway, for anyone that might be interested in the future, the rear wheel bearing size/type is: 62/28-2RS For measurements/dimensions...

Thanks for your reply, Gary! However, I was actually hoping to find out the the exact measurements/dimensions and specifications of the bearings, so I can just order them directly from my local bearings dealer. If I go the OEM route, or buy them aftermarket from a well-known name in the...

Hey guys, I would like to revive this topic, because the original question was never actually answered. So, does anyone know? What size/type wheel bearings do I need to look for? Thanks in advance! Dennis

I am pretty sure there is no kit available, so you would have to buy all parts separately. I run this exact chain (118 links) in combination with 15/48 sprockets:

I just ordered a +2 rear sprocket AND a -1 front sprocket, which should be equal to going +5 in the rear only. Very curious for the results...

Fuel leaking problem solved! You were right on the money, @TownsendsFJR1300. It was indeed a pinched/crooked o-ring between the upper and lower part of the fuel pump housing. Pro tip: Unfortunately the big o-ring between the fuel pump assembly and the fuel pump has flattened a hardened...