Recent content by subaron

This part has been SOLD

Btw, just realized by S1 bracket you probably mean the speedo mount. The speedo mount is not included and needs to be custom made. I had used a plastic cutting board, which I cut down to size and then drilled holes in the appropriate places to mount it onto the headlight frame at the...

I had use the set up for a 2005 Yamaha Fz6, but had to modify the bottom mounting hole to attach it where the horn is placed on the motorcycle.

SOLD I am cleaning out the shed and found another box with some spare parts for the OEM Yamaha FZ16 headlight which is known as the VS02 kit on this forum. Here is a list of what is included: Headlight Frame - The frame is new and unmodified. Will need to be modified for your application if...

SOLD This headlight is from a Yamaha FZ15 (sold in India). It looks like the VS02 kit. I fabricated a speedo mount out of a plastic cutting board, which held up well for the few months I had the headlight on before switching to another setup. I can throw in the fabricated speedo mount. Note...

If anyone has the front yellow/amber reflectors lying around that they don't need please let me know. I will pay shipping of course. Thanks in advance.

SOLD 2005 Yamaha Fz6 Has about 34,500km mostly highway commuting miles. Custom headlight that I made BD43's headlight mod Fz1 Handlebars

If anyone is getting rid of their stock turn signals, I am interested.

Maybe I will try replacing the hose as it has never been changed. Bike is a 2005.

Clutch cables hasn't been lubed recently. I degreased the entire area around the brake pedal. The blow back oil spot is from when my oil cap came lose a few months ago. Figured oil was good for the metal stand, left it there to function as grease, but it ended up picking up dirt.

I noticed that there is a very small oil leak on the bike the other day. Haven't noticed any drops on the floor, but just running on the metal. I cleaned up the entire bottom of the bike and the only spot I noticed oil when wiping was at the lower hose at the metal connector where the two pipes...

Where do I buy those tank protectors?

That looks really. Good. My project has been on hold since last week. Will pick up again next week. You got the 3/8 tubing from Walmart?

Does anyone know where to find a cheap headlight fairing. The one you usually see with round headlights. A tiny one that is all black would cover the wiring. I might try to fit my VS2 kit fairing with some mods. See how that turns out in the meanwhile.

Yeah. I went over the sharp edges with a sanding block. it is fairly rounded. Not sure there is any space inside/under the tank to pull the wire. I tried pushing it in a little, but than the H4 connector would not make it to the headlight. Maybe I need to build an extension for the H4 and turn...