Bike not starting

Motogiro

Vrrroooooom!
Staff member
Moderator
Elite Member
Site Supporter
Joined
May 8, 2008
Messages
14,968
Reaction score
1,138
Points
113
Location
San Diego, Ca.
Visit site
The yellow/green and blue are connected
There may be a specific resistive load on either side of the 3 wires that the ECU needs to see. If you just bypass a circuit with understanding what that circuit is designed for you can damage components in the ECU.
 
Last edited:

Killakody

New Member
Joined
Mar 23, 2021
Messages
9
Reaction score
6
Points
3
Location
Cincinnati ohio
Visit site
Hey guys, sorry for such a late reply. I ordered a new lean-angle sensor. I DO NOT have the connector, is there any way y’all can show me what wires go where into the sensor? I’m gonna try and use spade connectors till I find the connector online.
 

TownsendsFJR1300

2007 FZ6
Site Supporter
Joined
Feb 7, 2009
Messages
12,516
Reaction score
1,157
Points
113
Location
Cape Coral, Florida, USA
Visit site
Hey guys, sorry for such a late reply. I ordered a new lean-angle sensor. I DO NOT have the connector, is there any way y’all can show me what wires go where into the sensor? I’m gonna try and use spade connectors till I find the connector online.


A lil blurry but this should do it:


DSCN0140.JPG
 
Top