Fz6 2005 need cdi pin id

Ericrunner

New Member
Joined
Mar 19, 2019
Messages
3
Reaction score
0
Points
0
Location
Cambodia
Visit site
Hi im currently building a reverse trike for my wife. Im desperately looking for pin id on the cdi as i have no wire harness so i will make my own. Dont tell me to go see the dealer im in Cambodia tks
 

FinalImpact

2 Da Street, Knobs R Gone
Site Supporter
Joined
Mar 16, 2011
Messages
11,137
Reaction score
184
Points
63
Location
USA, OR
Visit site
Seriously go to ebay and grab a used harness for S1 or S2. The connectors alone will cost 4x that.

The coils are are marked with a very tiny + and - near the spade btw...

Connectors including the ecu can be found here.
https://www.corsa-technic.com
 

FinalImpact

2 Da Street, Knobs R Gone
Site Supporter
Joined
Mar 16, 2011
Messages
11,137
Reaction score
184
Points
63
Location
USA, OR
Visit site
I have the plugs for the cdi what i need to no is what pin is what!

What are you referring too? What is the cdi? Do you mean the ECU? A 34 pin connector?

If so it is posted on the forum in a sticky and a few other places. Most of them by me.
 

Motogiro

Vrrroooooom!
Staff member
Moderator
Elite Member
Site Supporter
Joined
May 8, 2008
Messages
14,968
Reaction score
1,138
Points
113
Location
San Diego, Ca.
Visit site
That number and picture are for a Yamaha FZ600. The FZ6 was manufactured between 2004 and 2009 and the FZ6 is a different bike than the FZ600. You will need to confirm what year and model engine you are trying to get running. The unit you've pictured is not an FZ6 module, Do you have better, confirmed info on your engine?
ed6wumg
 
Last edited:
Top