In need of main center bike stand!

SirLanceralot

New Member
Joined
Jun 19, 2017
Messages
26
Reaction score
1
Points
0
Location
UT
Visit site
Just purchased my first bike this past saturday! Anyhow i've got an '05 FZ6, but previous owner did not have the center stand for it. If anyone has the OEM center stand they don't need it would be greatly appreciated!!! Need to be able to tighten rear chain, which is just a little loose and remove the rear wheel in about 1000mi to put on a new tire!
 

TownsendsFJR1300

2007 FZ6
Site Supporter
Joined
Feb 7, 2009
Messages
12,516
Reaction score
1,157
Points
113
Location
Cape Coral, Florida, USA
Visit site
Don't have a CC but in the mean time you can check / adjust W/O the stand.

Find the taughtest spot on the chain and stop the wheel there.

On the side stand, you can check adjust the chain.

It's best if you can "block" between the inner fender and rear wheel (max suspension droop) for the most accurate setting.
 

SirLanceralot

New Member
Joined
Jun 19, 2017
Messages
26
Reaction score
1
Points
0
Location
UT
Visit site
Don't have a CC but in the mean time you can check / adjust W/O the stand.

Find the taughtest spot on the chain and stop the wheel there.

On the side stand, you can check adjust the chain.

It's best if you can "block" between the inner fender and rear wheel (max suspension droop) for the most accurate setting.

Got it! Thanks for the info! I'm fairly new to bike maintenance, but I am pretty saavy with car maintenance/repair.
 
Top