- Joined
- Mar 23, 2012
- Messages
- 1,599
- Reaction score
- 832
- Points
- 113
- Location
- Northern New Joizey
As the title suggests, I want to find a reliable, good looking set of LED front directions for my repainted 05 FZ6.
Background - after an on-ramp diesel fuel induced low side last June (thanks Shortline Bus diver) I have been putting both bike and rider back together again.
I already had a spare fuel tank and visors (in Red) that I purchased earlier, to play with different color schemes. The low side accelerated those plans, so I had a friend of mine repair the tank and paint it and the visors Pearl White. The original colors were Silver and Black, and years ago I purchased a pair of Watsen LED directionals in Silver. They are terrific, shame that the owner retired.
I am considering painting the Watsens, but before I do that I want to see what else is available that would look good and be bright enough to be safe.
I have seen lots of choices for those that stick way out, and I am not going that way (unless I do the DRL mod that Randy and others wrote about).
So to start, let me know if you have any suggestions for low profile LEDs.
Thanks
Background - after an on-ramp diesel fuel induced low side last June (thanks Shortline Bus diver) I have been putting both bike and rider back together again.
I already had a spare fuel tank and visors (in Red) that I purchased earlier, to play with different color schemes. The low side accelerated those plans, so I had a friend of mine repair the tank and paint it and the visors Pearl White. The original colors were Silver and Black, and years ago I purchased a pair of Watsen LED directionals in Silver. They are terrific, shame that the owner retired.
I am considering painting the Watsens, but before I do that I want to see what else is available that would look good and be bright enough to be safe.
I have seen lots of choices for those that stick way out, and I am not going that way (unless I do the DRL mod that Randy and others wrote about).
So to start, let me know if you have any suggestions for low profile LEDs.
Thanks