FZ6 Puig Fly Screen (FZ6-N)

Yeah I have a puig fly screen, not quite the same as in the picture. It is easy to fit and works relatively well
 
This is mine (light smoke):

vUWEABW.jpg
 
on mine you just replace the fork clamp bolts with some extended ones, and it clips into that, there's a bit of give and you can angle it slightly
 
on mine you just replace the fork clamp bolts with some extended ones, and it clips into that, there's a bit of give and you can angle it slightly

Yup same with mine! It's hard to say if the S2 screen would fit the S1 though. It would be close so you would have to just try.
 
Yup same with mine! It's hard to say if the S2 screen would fit the S1 though. It would be close so you would have to just try.

thanks for the help guys, appreciate it!

Benji i assume yours is the S2, is that the stock flyscreen? and also, where can i source some extended mounts to fit it? as ive looked online and cant see any.
 
Back
Top