How we lead such similar lives mate lol...
Sent from my HTC One using Tapatalk
Sent from my HTC One using Tapatalk
Where are you right now? Forum "Selfies"
- Thread starter Nelly
- Start date
A couple of hours ago
You definitely have too much fun.
Sent from my DROID RAZR HD using Tapatalk
TopPud
-Matt-
Few Selfies from the week. Badgers lost tonight but i'll still post the pic from the Illinois game :rockon: And a Couple selfies from Work, Where I am now. That's and engine block at the beginning of assembly btw.
TopPud
-Matt-
Well its 1:40am and 3 Degrees, Id rather be riding my FZ6 then here at work!!
What in the name of Zeus does that thing power?
Nelly
Sent from my HTC One using Tapatalk
Nelly
Sent from my HTC One using Tapatalk
rickgu
Junior Member
My guess is a ship.
TopPud
-Matt-
It sir Powers, Naval and coast guard ships, nuclear power stand by, and oil pipe line pumps
Do they keep you cold on purpose or is it just the weather?
Sent from my HTC One using Tapatalk
Sent from my HTC One using Tapatalk
TopPud
-Matt-
haha just the weather, The plant is a bunch of separate buildings and there is also some work outside. But the place feels like a sweat shop in the summer!
Yesterday at sunset.... Nice and grainy...
I'm guessing it make more TORQUE than all of our FZ's combined!!!
Does it have a model number so some details can be looked up? Any specs?
Tks!
TopPud
-Matt-
I'm guessing it make more TORQUE than all of our FZ's combined!!!
Does it have a model number so some details can be looked up? Any specs?
Tks!
Here yea go, Colt-Pielstick PC2.5 STC Propulsion Engine | Fairbanks Morse Engine
and this is our biggest, FM-MAN L,V 48/60B Diesel Engine | Fairbanks Morse Engine
TopPud
-Matt-
I'm guessing it make more TORQUE than all of our FZ's combined!!!
Does it have a model number so some details can be looked up? Any specs?
Tks!
Here is a link I found to some more info on the colt-pielsticks
SEMT Pielstick Engines
And on a side note, It is believed that where I work we have the largest muffler in the word or usa? Someone please correct me if i'm wrong? but heres a pic of it.
I worked on these on the CG Cutter Hamilton that I was on(decommed now).
Fairbanks-Morse 38 8 1/8
Fairbanks-Morse 38 8 1/8
TopPud
-Matt-
I worked on these on the CG Cutter Hamilton that I was on(decommed now).
Fairbanks-Morse 38 8 1/8
Were actually remaking OP's for the first time in like 10 years, great reliable engine!
- Joined
- Oct 18, 2008
- Messages
- 2,601
- Reaction score
- 104
- Points
- 63
- Location
- Edenvale, South Africa (GMT +2)
In my "office"
Great picture, why did I think you were a high performance sail maker? Who am I confusing you with?
What is your job? I'm leaning a bit more towards medical rather than nursing as nurses tend to be more compliant with the "Bare Below elbows" guideline.
Nelly
Sent from my HTC One using Tapatalk
Last edited by a moderator:
- Joined
- Oct 18, 2008
- Messages
- 2,601
- Reaction score
- 104
- Points
- 63
- Location
- Edenvale, South Africa (GMT +2)
LOL no I am not a sailmaker, I am an anaesthesiologist.
Not really but I do work for one of the world's leading healthcare technology companies so I get to spend quite a bit of time in the OR training anaesthesiologists to use our equipment which has some unique and cutting edge technologies that save money and improve patient safety (end sales pitch LOL).
The "bare below elbows" guideline is well enforced in the UK but not so much here. Personally I am all for it.
Thanks for the update, who do you work for? I might have used some of your kit in the past.
Sent from my HTC One using Tapatalk
Sent from my HTC One using Tapatalk
Ditched my laundry and to-do list for a bit this morning. I feel better now.
