FZ6 locks replacement

[Andrey]

Hi, guys!
Last two years ignition lock on my FZ6 S2 works very badly. Sometimes it tooks 3-5 minutes to turn a key (I know that it is common problem for most of Yamahas).
I've tried different lubrications but alas nothing worked well...
Since I have US version without immobilizer, I decided to change all three locks (ignition/ fuel tank / under seat). My main point is that I want to have one key for all three locks.
As I've understood if I order three separate locks, there will be three different keys in my case.

Is there any solution? Have somebody face the same problems?

Thank you

 

[bigborer]

Just buy something like this : https://www.ebay.com/itm/2005-YAMAH...23b2d5f3:g:CQ0AAOSwilJbWjT4:rk:2:pf:1&vxp=mtr

 

[Andrey]

thanks
and what about products from Chinese friends?
like this... https://ru.aliexpress.com/item/-/32914767451.html
but don't sure about the quality

 

[TownsendsFJR1300]

The older FJR's had a re-call on the ignition switch.

Initially, Yamaha wasn't re-keying the switch to match the rest of the bike.

After many complaints, Yamaha started rekeying the lock cylinder to match. The switch is virtually the same but has a parking light "spot" to the switch.

It can be done, check with a lock smith or local Yamaha shops...

I'd steer clear of Chinese knock off's.

A used switch may be ok, but you may be in the same boat there after. I'd rather have new OEM..


IE:

https://www.fjrowners.com/discus/messages/9/36618.html