Recent content by BlackSeicento

Hi all, I'm tracing a lack of continuity between the right hand turn switch and the connector to the main front end wiring loom on my 5VX S1. The turn signals works when I run a cable from the right hand switch post to the front indicator (front, rear and telltale light all illuminate) so I...

That's correct, I'm in the UK so I don't believe I need the side marker functionality.

Thanks all, the -10 swapped out for the -20 fine. The 2-wire connectors to the indicators mated to the 3-wire connectors on the indicators fine and they work as expected.

Thank you both, it was a bad connection that was remedied by a quick clean with some contact cleaner and fine-grit sandpaper. @grahammarsden it has the all-digital display, with the rev counter being LCD bars going around the cluster. I think that the bike is a late registered bike (it's an 07...

Hi all, New member, I've just repaired my front headlight loom as there was a break in the right front indicator. When putting back together and testing I've found that the LCD display is no longer working. When I initially connect the two plugs to the display it appears to do a quick POST (all...

This really helped me in troubleshooting an indicator that wasn't working, thank you.

Ah, OK, when it turns up I'll have a look and see what needs adapting. Thanks for your help 👍

Yes, you are correct, it's 84359. The -20 is on a sticker on the front fairing loom.

Hi all, I'm a new (3 weeks) owner of a 2007 FZ6 S in the UK. Last weekend the right indicators stopped working, I traced this down to a bad wiring repair job on the front-right indicator. In doing this I noticed that the Indicators and plugs for the front indicators have 3 wires, not 2. Looking...