Recent content by Bronxman968

Cable that came off

Just came loose I’ll test it out after work

Was riding when the bike stopped out of no where and wiggled it around a bit to start back up. Trucked it home and found out one of the cables to the ignition cable had just snapped off. Going to clean up some connections what can I do with the loose cable?

Alright preciate it I’ll do a flush today and see how it goes

Usually it’s moderate traffic nothing too crazy. Usually it’s staying around 192 during the ride but I don’t know if it’s just the Texas weather making it reach up to 200. Think I should test something?

I cleaned the contacts and it seems to have worked from a earlier post. Bike does not turn off not (at least from the 30 min commute daily) but after each ride I notice the temperature spikes when I turn the bike off. Was wondering if it’s normal because during each ride it peaks at around...

Have been busy with work but I will try tomorrow and let y’all know what happened. Thanks for all the responses!

Also, should I try and switch it out or just bypass it completely?

Yea everything stays on it’s just as you say the engine just turns off but everything stays on.

Got the bike running now but after riding it back it goes for about 5-10 mins and then randomly the throttle won’t give any gas. Ride fine when it works but then it’s just no revs yet the bike stays on. First round it shut off was normal, got it to start back up, then the second time I found out...

Finally gave in and just took in to the shop. Appreciate all the help everybody!

Voltage read at a normal charge

Will check tm. Do you know what they’re usually supposed to read?

I recently bought an 2008 FZ6 and have not been able to start it but once. No immediate codes are thrown and I checked the past codes being 12,30, and 43. I have gone through the diagnostic codes and made sure the past ones were cleared. That being said, the fuel pump will not prime and the bike...