-
Welcome to the Yamaha FZ6 Forums. Member registration disables ads and allows you to post and share. Register Here.
jomor147's latest activity
-
Jjomor147 replied to the thread S2 Crank but no start. Low d09.Yes I understand that, I insist on cranking because in the past most of the times it manage to start after some retries, and switching...
-
Jjomor147 replied to the thread S2 Crank but no start. Low d09.CPS measured at 299 ohms. Spark plug looks like this I tried again cranking this morning and I ve got no spark at all.
-
-
Jjomor147 replied to the thread S2 Crank but no start. Low d09.Second day with replaced, used fuel pump assembly. Today same situation. But i got this on video, is this a healthy spark?
-
Jjomor147 replied to the thread S2 Crank but no start. Low d09.Yes thank you for this, it must be able to plug in threaded stud, like the one I have (which connects to chassis on the other end, so...
-
-
Jjomor147 replied to the thread S2 Crank but no start. Low d09.I don't want to think that I have two problems at the same time. Fuel pressure loss after ignition off which was verified with...
-
Jjomor147 replied to the thread S2 Crank but no start. Low d09.This afternoon leaving work the bike refused to start again. Did not have the spark tester with me unfortunately. I primed via d09 and...
-
Jjomor147 replied to the thread S2 Crank but no start. Low d09.Today (12 hours after not being able to start it and having error 12 and battery kind of exausted) I plugged for a while the battery...
-
Jjomor147 replied to the thread S2 Crank but no start. Low d09.Now it's getting more complicated. Today it refused to start. Primed 4 - 5 times, i even entered at diagnostic d09 to activate the...
-
Jjomor147 replied to the thread S2 Crank but no start. Low d09.I ve got two pressure regulators 2.5 bar in my hands. I have also arranged with the mechanic to replace the pump motor again in case...
-
-
Jjomor147 replied to the thread S2 Crank but no start. Low d09.the problem re-appeared. If its a vapor lock indeed, it wasn't resolved by replacing the pressure regulator. Could it be the fuel pump...
