Search results

I have one off an 09. Main blemish (paint scrape) is shown in third image in upper left hand corner. Let me known if you want some other pics.

These parts came off a bike parted out at 1200 miles. They're in great condition. I'm doing a r6 fork swap and no longer want to hang onto these spares. Front Rotors $130 + shipping Front Calipers $70 + shipping Pics here.

I've got one barely used off an 09 with 1200 miles on it. $50+shipping? Pics here. Sure you don't just want to rebuild it with new seals?

Both have been claimed!

2x brake levers 1x clutch lever 1x motodynamic integrated rear brake light (has been on bike for at least 20k) Pics here. Free + cost of shipping Want to get this stuff out of my garage!

There was only a thousandth or two diff in thickness between the old and new bushings after 43K. Depending on where it was measured, equivalent. With the new bushings, it felt like there was very slightly less play. With oil in and the seals/wipers on, no play is felt at all. I guess the...

We're talking about bushings....

No dial indicator. Used a PVC piece to put the outer tube bushing in. The movement is with it bottomed. I didn't feel this movement when I first took them off the bike (but they had oil and seals then). I guess I'll swap them out.

I took my fork apart at 43K to replace the seals/oil/bushings. The bushings all appear to be good, no wear marks or visual differences in the bushing surfaces. Having put the two legs back together, with no oil in them and without the oil and dust seals in, there is a slight bit of play. Is that...

$5 + shipping. PM me.

I have one off an '09 engine with only 1200 miles on it. PM me if interested. http://www.600riders.com/forum/bikes-parts-sale/47900-09-fz6-partout.html

As stated in the first post $15 left, $35 right. Link to pics in first post should still work. Left has marks, right is good to go.

I have two of the rear sections, one cat, and one header. PM me an offer. I'm very willing to get rid of the rear sections. They're going to be a pain to ship though.

Grab Handle Photos by zbrowning | Photobucket

I'm sorry but that is no longer available.

It is no longer available as mentioned in the first post. Thanks

I have it. I can get a pic this evening.

How does it even get this bad? I find it hard to believe normal lube, tension and alignment would result in this.

Four plates for two signals.

I'm not sure what you mean by cover the hole, but I have these mounting plates if you want them. Free + shipping. I have no use for them. I bought them for my Rizoma's but eneded up using something else.