Search results

I have leovince exhaust stock filter Changed co 1 and 2 to 18 and have more power and doesnt stutters right now. I hope i dont hurt the bike but i feel more power and its sensitive on throttle i like it. Do you guys have experience with co 1 2 numbers?

Hi guys im back. And problem is also back after 230km driving. Im almost done with this issue. It worked after i replace the hole throttle body. The issue is back i dont know where to start with trouble shooting ( it worked also fine with the battery)

I've been touring for hours today and I probably have the most expensive ride today had. It was a nice intensive journey :) Dutch saying: go with that banana. I painted the hole bike with shappire black metallic like my wife s e46 bmw it got flakes and you clearly can see it in the sun!

I guys i think i fixed the problem. Just drove 320km to buy an TB complete with injector tps vacuüm sensor fuel line etc. I put it on my bike but it doesnt start i didnt get fuel at three injectors( new secondhandTB) so i put my own wire to the new TB and its flies as a rock. I feel more power i...

Thanks for your respons, i dont see a difference if i rev it shakes a little but its not that much it doesnt drop that much! I got a new ecu and i checked the diagnostic mode the co 1 and co 2 they are both at 0 and most people have 10 difference like co1 at +2 and co 2 at 12 or something could...

I got a pressure tester when it pumps the gas for like 3 sec its getting up to 47 psi and after it drops to around 40 psi and after a while it stay at 37 psi for a bit so its not the pump and not the regulator. I tested with a Throttlebody sync tester. And it says leak in vacuüm or valve issue...

Do you guys know how many bar/psi i need on the pressure regulator? This new one is 3 bar. And some websites like ebay they sell 3.5 bar for fz6. The question is after 4k/5k rpm sometimes until 8k rpm but after it works fine. Maybe i have to buy the 3.5 bar idk. Btw the fuelpump is 12.4v in...

Round 4k rpm i reach 14.04 volt on my battery. I really was hopeless until i drove :) My bike runs but high idle til 4k rpm somes it goes higher but mostly it stops at 4k rpm. I got a repair option at my battery charger. Wil repair it and after that charge it to max. And test it again or...

Guys i think i found the problem. I changed this pressure regulator and it revs like a beast. Didnt rev too much because my babe is cold. Guys Thanks for all your support and respons i really love you al and if i can do something for you guys please let me know

Its gas throttle, Oxford gas handle.

Thanks for you answer! The fuel is clean and filter is also clean but i think i have put this ring on the other side. I will check it en test it again

From the car battery i will get around 12.1 12.2 It starts nice and also have good idling but when i rev it drops if i spam my gas like close throttle open close open close it will be get higher and bloks. The rpm it stutters or something. See video Tested all fuses it fine. If its starter...

Yeah exactly it runs like my own bike battery but if i disconnect the power from car battery (directly connected without connecting the wireharnas) it does when i disconnect the carbattery so its the same. the battery is charging right now. I didnt start right now because its midnight here. I...

Hi guys i found an other thing diag mode number 1 Zero throttle must be between 15-17 Open throttle it must be 97- 100 And mines are 16 and 102! I think we got the the issue but this is what i always say lol

Thanks guys for you response. I mean i put directly 12.3 volt from my car to the pump without connecting to the car. So my pump got fully 12.3 but it doesnt work when i disconnect the directly connection from pump to car the bike stops with pumping and dies. When i try to start without air...

When my tank is empty the fuel pump pumps 11.8/9 while priming

Its fully charged right now 13.16v but still same problem. I put directly 12.30v from my car to my fuelpump got the same problem when i disconnect the car battery the bike stops running so its seems my fuelpump works fine. And also tried with starting with the car battery I put new fuel inside...

I search alot on the internet but could be fuel pressure regulator?

11.1 volt while priming