For sale: FZ6 OEM bellypan/lower cowl
Hi guys,
I have a brand new bellypan with its brackets for sale. It fits the the FZ6 04, 05, and 06.
I'm planning on buying a new bike with all the fairings so i don't want to bother sanding and painting this one. It's one piece brand new...
thanks for the suggestions, since my bike has that cerulean blue color, i was going to paint the pan with that color.
are you sure any primer and clearcoat will do? i read that when possible, use the same products for each painting phase from the manufacturer so that there is no chance of...
Hi guys,
I wanted your advice on something. I just ordered a belly pan , $140, that i will have to paint, and from all my searches, it looks like Colorrite is the official supplier for yamaha paint if i want an exact match, so i'm thinking of getting the following:
- 1 spray can of primer...
Jtarkany1,
I'm thinking about ordering one of those lower cowls you ordered from Lithuania...what kind of prepping did you have to do? was it difficult? I'm planning on ordering the OEM paint from colorite, so to make it really professional looking, I assume that I will have to prime it since it...
well...i installed a new pump, from an FZ6 this time, and the bike is working and not hesitating or stalling!!
one thing i noticed on the fuel pump: the R6s pump didn't come with a small part on top of the pump, see the circle in the picture. The FZ6 one had some kind of metal washer with a...
do you still have the fuel pump for sale? you would be shipping overseas? how can we make it a reasonable safe transaction in case it doesn't meet spec per yamaha or is not functioning properly? thanks
the part number for the pump of the FZ6 is 5VX-13907-01, and I used an 08 R6s pump 5PW-13907-01. I believe as long as the digits are the same, other than the first 3 digits, then it should be ok...
just like you said, i found an R6 manual that showed the pressure to be at around 40 psi, but as...
has anyone measured the fuel pressure of the FZ6 compared to the R6??
The manual for the FZ6 states that the normal pressure should be around 36 psi.
Here's the history for this question:
I've taken my bike to the stealership for stalling/overheating issues (after 5 mins of idling, the bike...
Guys,
Do any of you know what the size of the fuel line from the tank to the injectors is? I'm thinking of adding an inline filter, and want to get the right size.
It shouldn't be difficult, just cut up the existing line and add the filter in with clamps on each end, correct? has anybody...
Hi guys,
i'm in the process of checking the thermostat, and i was able to take one bolt out but the other one is under the throttle bodies...is there an easy way to remove the thermostat without removing the throttle bodies?
Happy 4th of July guys!
Can you tell me how I can measure the idle speed on my bike? Does the Diagnostics mode show you or do i need a special gauge? I know that I can adjust it by turning the screw that's under the tank.
thanks!
problem fixed!!!
with one more try in mind, i looked at the relay one last time and tested the continuity. i was tempted to open up the relay itself, but it seemed like it would be quite a job to pry it open...so i thought maybe i'll take a look at the fuses again....and lo and behold, the...
ok guys,
i changed the battery, i'm getting a good 12v under load now, but it's still not starting. However, the engine sounds different when i try to start, almost sounds like it really wants to start, but is out of gas???? can't really describe the sound...
i've checked the fuel pump...