Recent content by JMF

@Motogiro @Gary in NJ @TownsendsFJR1300 Thank you all for your help. Yesterday I dropped off the new battery to retailer for load testing. Got a call that it had failed testing and they believed it to have a bad cell and condemned the battery, replaced under warranty. I picked up the new...

Will do, I’ll remove it, charge it, and have it checked. Thank you for the feedback. I will update

Yes, I experienced the same results. It only charged to 11.4v

@Gary in NJ I installed the new starter relay for kicks. I noticed something interesting, however. I measured voltage before doing anything and was reading out around 11.5v. As soon as I turned the key to on, I measured again before attempting any starting and noticed the voltage was down to...

No worries, motorcycle was in neutral and up against a wall! 30 amp fuse looked good, I checked it after trying to jump the terminals. I’ll double check it later though with my multimeter. I will also double check ignition fuses on the side of the bike. With the price of this relay being...

@Motogiro @Gary in NJ Not a lot of luck here. Trying to jump the terminals created a ticking noise from a small black box on the left side of the bike, shown in the videos. I’m pretty sure this is the relay assembly (5mm-30), not that I know what that means. After all of this, I measured...

I’ll be giving them that a shot tonight and updating. Thank you for your help!

Also, how do I go about jumping the terminals? Connect to vehicle (not running) and attempt to start the bike? Just want to make sure I am understanding. Also, I made myself a spreadsheet of the diagnostic menu as seeing it laid out is easier for me to digest. I noticed that d09 shows 0.0 which...

Thank you for the welcome! Okay I’ll try and give that a try. I had just switched the battery beforehand. Am I able to try and start the bike with the tank lifted?

Well, I am in need of some advice. I am only moderately mechanically minded so I feel that I have checked the things that I know how to check, and could use some pointers in the right directions. I am getting this audible electric/clicking sound coming from the ignition/dash area when...