speedfreak

Yeah it does look pretty good. Not sure why U.S. doesnt have one. Forget the card, pay cash or dont buy it. Those cards have ridiculous interest rates. You know, you could always go the other way... naked, then you could sell your fairing and be in the positive! Just a thought.

Oh, ok, that fairing would be awesome, you should start a thread and post pics when you get it installed.

Thats technically correct, but you can do it very carefully...moving each side about an 1/8th of an inch at a time and have the forks stay aligned. I moved mine up in the triples the second day I had the bike. Ive put about 3000 miles on it and ive never had any vibration and there is no sign of irregular wear in the tire. I moved mine up about an inch and a half! I saw the carbon fiber thing and thought about that, just to cover up the holes. where did you get your belly pan? how much?

Well, in my opinion, changing the handlebars is probably less involved and complicated than putting on a new exhaust but if you dont feel comfortable doing it, definitely let the dealership do it. What are you going to do about the triple clamp bar clamp thingy sticking up?

No big deal, thats why I linked straight to the posts, let me know if you need anything else.

Sorry, I'm still new to this forum thing.

Did you read the information I gave you? This post:
http://www.fz6-forum.com/forum/fz6-mods/6858-clip-ons-triple-clamps-3.html#post81920
says that mine were off a 97-98 model. Those are the only ones I have. I havent tested any others out but I also said that the shock tubes are 43mm. If you research cbr1100 year models, you will find what diameter are on which bikes. I also said in my post that I just looked at the picture and estimated the rise height of the clip-ons. I posted a couple of pictures in that thread that should give you an idea of the rise height that mine are and I know they work.
Good luck.

Be patient and someone will be selling some. I bought mine individually - left on one auction, right on another. If you try to buy them from the factory, you'll pay an arm and a leg.

try this:
http://www.fz6-forum.com/forum/fz6-mods/6858-clip-ons-triple-clamps-3.html#post81920
As far as I know f4 bars are very similar but with less rise. They will fit the tubes (43mm) but I dont know how they do with the tank/fairing space restriction.
unfortunately, this is all I found on ebay:
eBay Motors: HONDA CBR F4 F4i 99 06 R/CLIP ON HANDLEBAR W/EXTRAS!!!! (item 120289369853 end time Aug-06-08 16:31:59 PDT)