Recent content by Tom24GR

Hey guys I'm planning to do this to my bike and was wondering whether I would be able to support the bike with the center stand alone. Obviously cuz the swingarm is coming off I can't use a rear stand but will the center stand keep my bike upright (since its mounted to the frame)? thanks in...

Yeah I get what you mean. The master cylinder works great its just that the banjo bolt from the master cylinder his that adjuster for the accelerator cable. My first thought was to get one of those motion pro accelerator cable housings that go over the top of the handlebar (as opposed to the...

My fault. The adjuster which doesn't click is the rebound adjuster on the bottom of the fork. The preload and compression on the fork cap click away just fine.

Hello everyone, I recently bought a 2007 FZ6 (the one with the 2 4-piston non-floating calipers) and the previous owner had installed a Brembo Master cylinder 16 mm (but its not one of the aftermarket ones, I think it came stock on some other Yamaha- maybe an old r6 or something). Each brake...

Yeah I have those little discs I use them for cutting metal things all the time.

Hey guys, I ordered my springs and the new oil and was wondering what you all thought about ordering something like this. They are new compression and rebound adjusters for the forks. I figure since some of them aren't clicking and I'm already going to have them apart maybe I should add these...

Man You are a Godsend. You helped me out with all of my problems on this forum I appreciate it alot. My dremmel broke but a new one is coming tomorrow and ill get to it!

Hello everyone, I recently bought a 2007 FZ6 and I purchased a seat lock kit because my seat lock was missing. This kit came with the seat lock, gas cap with new lock, and ignition cylinder (the whole unit) plus new keys. I installed the seat lock and gas cap no problem but I needed help on...

I'm definitely going to get to the fork oil and seals within the next week. If I shake the forks back and forth and they move then we are talking about bushings where the fork mounts to the wheel? The forks don't visibly appear to be leaking but we came to that conclusion previously because of...

Hey guys. I have been unable to get to the suspension because I ended up having to replace the ignition cylinder, gas cap and seat lock. But after going for a ride yesterday I noticed something new and wanted to see if its related to my suspension. Under hard acceleration in a straight line, I...

Oh sorry I thought that 10-12 was only for the front

I will get started getting the supplies and checking sag which I can do now. How much free and static sag should the rear have approximately? Also wanted to say thanks for your help.

Very well. I am happy that we at least got the rear sorted out. Any idea on where to start with settings?

Oh okay I get what you mean. So in other words it is valved for the FZ6 and I can cross that part off my list?

OH his user name. I get it. Thanks again.