Search results

Thanks for all the comments. Just to so you know, I decided to give the floor as good washing and moved everything up against the main door so what you see in these pictures is a staged photo shoot. Trust me, this is not how my functioning garage currently looks with the vehicles parked, wood...

Just finished commissioning the heat for the garage to conclude an endeavor that started in June of this year. Everything from taping and mudding the drywall, the soffit and lighting controlled by a motion sensor, ceiling texture, and painting. Totally screwed up my whole summer of riding as...

From 23,000 feet up on the way to Calgary early in the morning...

Setup up looks great Erci. Your plywood platform looks large enough. I find that mine is sturdy/solid enough on a plywood platform because I'm standing on it when either breaking the bead or running the mount/demount bar around the tire. I've got traction tape in strips fanning away from the...

Thanks for the rep!

If you can take some pics, I'd like to see the changes they made. :D

I hear you on that one. I have yet to get out there myself. In the meanwhile I watch this..., an oldie but a goodie. Moab MTB 1993 - Youtube

I did walk the lines and saw a blue FZ8 Fazer and one other 2008 or 2009 black FZ6. I didn't see the rider and wonder if that person is a member of this forum? The black stratoliner is owned by one of the guys I was riding with along with a HD. :eek: :rockon:

Thanks for the rep mate! :Flash:

I skipped last year because I thought it was going to rain, I'm a fair weather rider, but this year it looked good until ... it "rained" :eek: We were off the bikes at the time in a small town called Mundare. Oh well, the bike needed a good cleaning anyway. YouTube - Ride For Dad...

Did you get this engine guard? If so, the belly pan won't fit over that. If you want the belly pan, replace the engine guard with frame sliders and you're good to go. Cheers!

If it's a Yamaha stock bellypan, it should install looking like this... BD43 Subcowl Installation

That's okay, take your time. ;)

Was just sayin in the Chat room, waiting for the streets to dry a little and the city to fill the miles of potholes. ....and, if I wasn't superstitious about jinxing or anything, we’re supposed to get up to 17cm of snow by Saturday, starting tomorrow night. WTF! :eek:

The sun’s out, temperature has been above freezing this past week and a bit, causing quite the snow melt down. I took the snow thrower out and ran it to drain the carb dry and gave it a good wash down in preparation for a well deserved sleep. This temperamental biatch served me well this past...

If you follow the black/yellow wire from the bulb back up to the switch in the wiring diagram, it connects to the high beam side of the switch. This is the same wiring diagram for all the years. The label would appear to be wrong for the 2004 and 2006 manuals.

The manual is wrong, they fixed it in the 2007 edition.

The H4 side should only have two wires going to it unless you have done a headlight mod to it. The two wire colors are black and black/yellow. The black is battery ground so if you were to measure the voltage from that black wire at the connector to the negative of the battery, you should see...

Thanks for the rep mate!