Search results

Also watch out for scammers on here, forums and facebook. I was approached by 5 scammers all claiming they had the part.

I couldn’t source the ecu on its own so I had to buy a second hand key set, barrel etc from Poland. It cost 250 quid. I couldn’t find one for Motomatrix to reflash that is a match to mine. you could send to Carno for repair but that’s almost cost the 250 for a replacement second hand key set...

I've come across so many scammers contacting me via FZ6 forums and Facebook groups whilst hunting for a specific ECU. I've found that requesting images of the part, then doing a google reverse image search on the image they send often locates where the scammers get the image. 1: Request image...

i would be interested in the ECU if it has "4s8-00" stamped in the plastic casing.

Hey ya everyone, Im currently looking for an exact match ECU/CDI for a FZ6 S2 2008 FUA0015 Stamped Code needs to inc. "4S8-00" F8T83771 8221 Thanks in advance

Battery is reading 12.5v

I'll check the battery voltage again in a few mins, the bike starts fine but sounds like a moped... back in a mo once i've checked the battery voltage.

* I had another poke around on the bike today and cleaned the run/stop switch with some electrical contact cleaner... the switch looks fine and functions as expected. The bike is out on the street so I was hoping this was the problem but sadly not. * I've also checked the voltage to the coil...

Thanks for getting back to me with this information, I'll check the voltage and the run/stop switch tomorrow and report back. Im running out of daylight hours to tackle it now. Thanks again for the advice.

Hey guys, first time poster so Hi... I need some advice on Code 34 on my dashboard (FZ6N 2008). Problem: The bike will start but sounds like moped and engine cuts out a few seconds if I dont maintain revs. There is "34" on the dash which I assume is the error code. * I have replaced the...