Search results

You measure the air chamber by removing the spring, bushing and washer and compress the fork. Then you measure the "depth" of the oil from the upper part of the fork till the oil itself inside the leg. This is called the air chamber In the service manual is written that you should use 134mm...

So, I've sent a message to Ohlins and got an answer :) As the service manual says 134mm air chamber, Ohlins recommends to use 120mm instead. This is measured without springs and bushings/spacers. They also recommend to use oil 01314-01. I'll adjust my forks this weekend and post the...

Hi, I don't quite see how you can mis-align the fork legs. As far as I know, the lower legs turn indepently from the upper part. When mounting, they will align themselves when mounting the wheel ??

I seriously doubt this :). I'm still in winter-mode.

My weight is about 61kg dry on the hook :) That should be something like 135lbs Its hard to explain, but I'll give it a shot. I have the feeling that the damping is not what is should be. I have the feeling that the front end is more loose than with the std springs. Although I do not have a lot...

Hi all, Yesterday, I swapped the standard front springs of my FZ6N S2 '07 with a pair of Ohlins front springs: 08711-85 - Öhlins As these were not new ones, they came without fork oil. My dealer gave me A-grade 10w oil. I fitted them according to the instructions in the service manual...

Already found that one, I presented the unit this way, but its not quite an eyecather with the extra wire and the unit on top of the N dash. Thanks anyway :)

I just installed an acumen DG8 on my '07 FZ6-[b]N S2. Everything is working but I'm still looking for a good place to mount the display near my dash. I thougt installing it between the dash and the ignition key, but I don't have enough room over there. Has anyone mounted such a device on...

Speedy, where did you do the dyno-run ? (I'm from Aalst ;) ) Also, does the adjustment of the CO flattens out the dip in mid-range rpm ?

zijn belgen ook goed ? ;)

Last weekend I drove around the block w/o dB killers and had to return to put them in. That says enough ? :) When I closed the gas in 2nd, the exhaust made some nice sounds too :p

I paid around €675 for them. Found them on the internet €15 cheaper though. But I ordered them here at a local dealer.

I've installed the Carbon Devil's this weekend. Sounds great. But I'm a little bit dissapointed with the finish of these units. The installation was rather annoying because I couldn't get them alligned correctly and took them off multiple times before I was statisfied Also, the weld on the...

Messing around in the DI menu today and stumbled across the CO menu. It appears that you can adjust the CO levels of the bike. Searched for some info on the net and found this: Singapore Fazer Club :: View topic - adjusting CO levels? and CO Adjustment (Explaination) and other ECU Fun -...

http://users.telenet.be/starwing/Bike/S2%20pinkers/IMG_2405.jpg Not quite clear, but you'll get an idea. I will make new pics once my Devil's are installed :)

I also removed the passenger steps, I painted the original bolts in black, this looks very clean. Maybe an idea for you ? Why didn't you order the tailtidy for the mini blinkers ? this unit doesn't have the large holes for the blinkers, but smaller ones where you can fit mini blinkers into...

Hello Guys, I am looking to replace the stock exhaust and also maybe the cat. Is it neccesary to install a PC (or rapidbike) after this to readjust the bike's injection ? Some say no, some say yes. You can put it otherwise, after buying a €900 exhaust, is the extra €350 worth the...

Aren't you suppose to ride the bike when programming this unit ? When I installed one last year on my FZS600 '02, I needed to drive so the rpm/speed ratio could be measured. Otherwise, I couldn't programm it

Evotech tail tidy and blinkers from whitelights.

I am new here, so hello to everyone :) Does anyone now where the blinking relay is placed in a FZ6N '07 ? I'm looking to mount some LED turnsignals onto my bike and therefore I want to replace the blinking relay Thanks, StarWing