sag

For those of you with adjustable suspension, think about these things as you ride.... Front: Not something I created, just thought I'd share. Tag JJD952 setup

So I have the urge to set the sag on my 05, and I understand the procedure, but as I am a heavier rider than the bike was made for (205 w/o gear) I figure I will need to lengthen the spacer to add preload. Does anyone know if I will need a longer spacer tube will some washers/spacers do the...

A couple months ago I installed a Penske 8983. I didn't have a friend around to help me set the sag, so I fiddled with the compression and rebound adjusters and found what I thought was about right, though the bike still threw me off the seat on heavy bumps. I didn't want to keep dialing in...

I modified a set of stock forks caps awhile ago with standard schrader valves. Chucking in the lathe, drilling the appropriate sized hole. Then epoxy a schrader valve in each cap, lock nut on each end. (The valve stems were left over from old MC tubes.) I looked at installing aftermarket...

Yet Another Suspension Thread Background: I'm trying to tune my suspension. Front feels a bit firm. Rear unbalanced with front and on the softer side. I had compared people's feedback on Racetech springs and Hyperpro setups. I went with Hyperpro because of positive reviews like this one...