2004 Fz6 clutch

Patrick1714

New Member
Joined
Oct 21, 2022
Messages
3
Reaction score
0
Points
1
Location
Ontario
Visit site
Hey I just recently picked up myself a 2004 Fz6, does anyone know if parts up to 2010 are interchangeable? I also just want to know if anyone knows how to reduce the force needed to pull into the clutch, I read that the MT-07 push lever, part 1WS-16340-00 may help, but i am not sure if it will fit. If you guys have any suggestions that would be amazing!
 
K

kristoffersmith

I changed the pulling angle the arm. I let some cable out and moved it a little past 90º so that I had more leverage as I got into the clutch pull
 

TownsendsFJR1300

2007 FZ6
Site Supporter
Joined
Feb 7, 2009
Messages
12,516
Reaction score
1,157
Points
113
Location
Cape Coral, Florida, USA
Visit site
Yamaha part # 1WS-15340-00 is the engine mounted (by the clutch) lever that's a bit longer and will fit the FZ..

It'll reduce the pull maybe 30% (approx), but you'll definitly feel it...

Pay close attention when swapping the lever to make sure it's "clocked" properly...
 
Top