Bought an S2 Swing arm, for S1, a little help please.

Paul Myrus

Member
Joined
Oct 4, 2014
Messages
82
Reaction score
19
Points
8
Location
Dublin Ireland
Visit site
Hey folks, I got an S2 swing arm, pretty cheap, Yamaha EU were charging me 1,012 Euro for a new one..
Anyways got a cheap one, question for the guys who have S2's

Is there any part missing in this pic? no worries if I need to buy the extras. for e.g I don't see any tensioners for the chain
Any help greatly appreciated unnamed (3).jpg
 

TownsendsFJR1300

2007 FZ6
Site Supporter
Joined
Feb 7, 2009
Messages
12,516
Reaction score
1,157
Points
113
Location
Cape Coral, Florida, USA
Visit site

Paul Myrus

Member
Joined
Oct 4, 2014
Messages
82
Reaction score
19
Points
8
Location
Dublin Ireland
Visit site

Paul Myrus

Member
Joined
Oct 4, 2014
Messages
82
Reaction score
19
Points
8
Location
Dublin Ireland
Visit site
This pic was for the brake line but in the far left, you can see the "block" along with a bolt and locking nut that goes inside to adjust the chain/axle.

Parts link to see what your going to need:

@
TownsendsFJR1300
Quick question Townsend, I can't find info anywhere on the net, are the S1 and S2 swing arms the same length? will I need new chain an sprokets? Only got new ones 2 months ago.
Thanks again for your help bro!
 

TownsendsFJR1300

2007 FZ6
Site Supporter
Joined
Feb 7, 2009
Messages
12,516
Reaction score
1,157
Points
113
Location
Cape Coral, Florida, USA
Visit site
They should be same length. Sprockets should all fit W/O issue. The adjusters are definitly different.

I'm not sure if the axle is the same...

Click on the link I posted above and see what other parts you may need. If in doubt about a part, just click on an 06 swing arm and compare it to the 07 swingarm..

https://www.partzilla.com/catalog/yamaha/motorcycle (Copy, paste and search)..
 
Top