maxpower3
Junior Member
Alright, here's the deal: I'm trying to install some Rizoma billet grips + bar ends that I got recently. I went to the bar ends of my 08 FZ6 with a hex wrench (allen wrench) to try and remove the stock bar ends. Only problem is that I immediately stripped the hex bolt holding the stock bar end on.
What are my options now? I've heard of "easy off," but I was hoping there was a simpler solution I'm overlooking that doesn't involve me shelling out for drill bits.
Thanks in advance guys.
What are my options now? I've heard of "easy off," but I was hoping there was a simpler solution I'm overlooking that doesn't involve me shelling out for drill bits.
Thanks in advance guys.