I couldn’t source the ecu on its own so I had to buy a second hand key set, barrel etc from Poland. It cost 250 quid.
I couldn’t find one for Motomatrix to reflash that is a match to mine.
you could send to Carno for repair but that’s almost cost the 250 for a replacement second hand key set...
I've come across so many scammers contacting me via FZ6 forums and Facebook groups whilst hunting for a specific ECU.
I've found that requesting images of the part, then doing a google reverse image search on the image they send often locates where the scammers get the image.
1: Request image...
Hey ya everyone,
Im currently looking for an exact match ECU/CDI for a FZ6 S2 2008
FUA0015
Stamped Code needs to inc. "4S8-00"
F8T83771
8221
Thanks in advance
I'll check the battery voltage again in a few mins, the bike starts fine but sounds like a moped... back in a mo once i've checked the battery voltage.
* I had another poke around on the bike today and cleaned the run/stop switch with some electrical contact cleaner... the switch looks fine and functions as expected. The bike is out on the street so I was hoping this was the problem but sadly not.
* I've also checked the voltage to the coil...
Thanks for getting back to me with this information, I'll check the voltage and the run/stop switch tomorrow and report back. Im running out of daylight hours to tackle it now.
Thanks again for the advice.
Hey guys, first time poster so Hi... I need some advice on Code 34 on my dashboard (FZ6N 2008).
Problem: The bike will start but sounds like moped and engine cuts out a few seconds if I dont maintain revs.
There is "34" on the dash which I assume is the error code.
* I have replaced the...