I made the changes today.
2006 FZ6 (US Model), Two Bros slip-ons
Factory: C1 = -20 and C2 = 0
I went +20 for both settings. I don't know about power, but there is MUCH less popping from the exhaust, and it seems to have taken the twitchy edge off the bike. It's a little softer in...
krid80... for clarity, the adjustments you stated in the first post are not absolute values you entered, but they are the differentials between the factory setting and what you changed to, correct?
I assume this because in another post you recommended keeping the factory difference between...
Thanks for the info! My intent is to use the removable racks, since I will ride with them off more than on. It sounds like you have the Givi permanently installed racks. Please correct me if I'm wrong.
If I picked up the subframe and the rear pegs/mounts, would everything else from my '06 bolt up? I'd like to get the removable Givi sidecase racks, but twistedthrottle.com only shows them available for the '07+. By changing the subframe, I think the racks wouldn't know the difference. If so...
Are you basing your assumptions of flow thrughout the RPM band on the flow at idle? I guarantee the flow will go where it needs to go (through both pipes) at higher RPM and greater CFM.
Is Scorpion shipping the cans wih the CF cones now?
I'm PhatDoggy on SBN, and everywhere else too. :) DefyInertia and I simply have good taste.
So you've figured it out. '07 is the first year for O2 sensors on the FZ6. The prior years have a much more basic FI algorithm.