2007 15t sprocket on my 2008???

[fz6joker]

Will a 2007 15t sprocket fit on my 2008???

It doesn't say on the package and the website is down for construction.

 

[dako81]

As far as I know, only differences between '07 and '08 is colors.

 

[opds9091]

+ 1, no difference

 

[fz6joker]

:thumbup:Thanks guys. Just wanted to clear this up.

 

[mattcosta7]

the 08s have no lock washers. The countershafts are identical though so it fits spot on!

04-07 have a washer bent to hold the nut from spinning. 08s just have loctite red

 

[YamahaMAXdRPMs]

the 08s have no lock washers. The countershafts are identical though so it fits spot on!

04-07 have a washer bent to hold the nut from spinning. 08s just have loctite red

nope 08's have a bent nut also, not the same as 08. but same idea, its a cylindrical edge that bends over the nut.

 

[ant_mb]

My 07 didn't have a washer bent on the nut. I simply slapped a socket on it and spun it off. Locktite was all that was holding it on.

 

[ready2goriding]

My 07 didn't have a washer bent on the nut. I simply slapped a socket on it and spun it off. Locktite was all that was holding it on.

Same with my '08. Caused a lot of general confusion... Hasn't fallen off though... :thumbup:

 

[mattcosta7]

Same with my '08. Caused a lot of general confusion... Hasn't fallen off though... :thumbup:

same here!

 

[ant_mb]

Same with my '08. Caused a lot of general confusion... Hasn't fallen off though... :thumbup:

Who was confused?

 

[OZXJR]

Who was confused?

I am now

 

[wrightme43]

Oh my God cant decide Brain aneurysm.


(Tenacious D.)

 

[luckyirishboy209]

look at the 2007 and then look at the 2008. take a look at part #16,33,34,35. in the transmission section. they have the same part numbers:thumbup:
JT MotorSports & Racing | Honda OEM Parts | Polaris OEM Parts | Suzuki OEM Parts | Yamaha OEM Parts

 

[coursonap]

be carefull if you reuse the nut that came off it can damage the threads on the shaft when you put it back on, the service manual says to replace that nut with a new one everytime you take it off. I tried to reuse the same nut and I spent 2hrs fixing the threads on the shaft. I bought a new nut and it worked great the only problem is that the nut is $15, and the only place I found it was a yamaha dealer fastenal couldnt get it.

 

[ready2goriding]

Who was confused?

I think it was Nelly- if I remember correctly...

 

[CanadianFZ6]

the 08s have no lock washers. The countershafts are identical though so it fits spot on!

04-07 have a washer bent to hold the nut from spinning. 08s just have loctite red

Nope, my '07 does not use the "bent" lock washer. Instead it has an extended locknut (flange) that you dent on 2 sides using a flat head screwdriver.


Warning... Do not use Red Locktite. Repeat after me... Blue locktite....

 

[mattcosta7]

i could swear mine had a layer of red underneath,...but I meant blue!

 

[OZXJR]

I,m a locktite nube,whats the diff in red and blue ?

 

[CanadianFZ6]

I,m a locktite nube,whats the diff in red and blue ?

... it's the difference between ever getting the lock nut off again or not.... If you use red, be prepared to use a torch if you ever want to remove the lock nut again...

 

[luckyirishboy209]

dont ever you red, just use blue med. trust me you wont ever get it off