Handlebar adjustment??

[YZF73]

Good to hear. Can you describe the pull back compared to the fz1 bars?
Someone posted a pic that shows the fz6/fz6r next to each other,
but I wonder how the fz6r bar compares to the fz1 ....

Here's a couple of photo's I saved from another thread of the FZ6R vs. FZ1 bars, and FZ6 vs. FZ1 bars when I was looking at changing (may have been from the thread linked above). FZ6R vs. FZ1 is not the best picture, but it shows that the sweep is pretty close, not quite the same. Main difference is that the FZ6R bar has the same inch rise of the standard FZ6, as opposed to the FZ1 which is flat. The FZ6R bar may also be slightly shorter as has been previously mentioned, difficult to tell from the photo.

Only other differences I've heard mentioned are, one, the colour, which for the FZ1 is the same as the FZ6, whilst the FZ6R comes out darker. And two, I believe I can see the welds holding in the threaded inserts for the bar ends on the FZ6R bar, worth checking to be sure though.


Hope this helps,

Yamahaboyz

 

[FrozenBiker]

Here's a couple of photo's I saved from another thread of the FZ6R vs. FZ1 bars

Hope this helps,

Yamahaboyz

Very much. :thumbup: