Leo Vince askew alignment

Karlzone

Junior Member
Joined
Dec 18, 2012
Messages
9
Reaction score
0
Points
0
Location
Sweden
Visit site
Hello everyone!
So I ordered a pair of Leo Vince pipes, and to make a short story shorter I slightly screwed up in my opinion. :spank:

The pipes are slightly askew and I have tried to straighten them up, but the task seems unnecessary troublesome. Help anyone? :confused:
 
Truthfully, those are damn near perfect.

It's almost impossible to get everything 100% just due to bend tolerances in the pipes. Button it up and enjoy your bike!
 
Yup. Mine are a bit off too. I got it as close as I could and said ferk it. They sound just as awesome, even if they aren't perfectly aligned. Trust me.
 
Truthfully, those are damn near perfect.

It's almost impossible to get everything 100% just due to bend tolerances in the pipes. Button it up and enjoy your bike!

+1! That's straighter than mine ever looked! Enjoy the sound!
 
i had a givi luggage rack on mine, I spent a good couple of hours trying to line them up
I put the topcase rack and the LV pipes in at the same time....not an easy task! It took 4 tries and LOTS of cuss words to get them as straight as I could. Go ride, you can give it a go again when it's cold out:thumbup:
 
you wont get better than that took me a good hour and i had grind out the plate that holds the mudguard/indicators to make them fit
 
My laser quads one side sticks out a tad more then the other. I took it apart to try to fix it and came out the same. Think its just off.
 
and don't forget to remove the baffles (db killers),
I have these on mine fazer and they sound awesome.
 
Back
Top