pookamatic
Junior Member
The passenger portion of the seat was rattling against the support bars, so I added some rubber to stop it. Not sure it my seat was missing stoppers or not. If you bump the rear seat down with your hand and get a vibration, this might work of you.
Here is a pic where it was hitting:
View attachment 47426
And here, you can see what I used... Some small cutouts of some gasket material I had laying around:
View attachment 47427
And because I'm vain, two coats of black magic marker:
View attachment 47428
The gasket stuff is as think as a quarter:
It's tight now. Requires a little more pressure to lock the seat but it's just right.
FYI- that mighty mendit stuff in the pic is awesome.
Here is a pic where it was hitting:
View attachment 47426
And here, you can see what I used... Some small cutouts of some gasket material I had laying around:
View attachment 47427
And because I'm vain, two coats of black magic marker:
View attachment 47428
The gasket stuff is as think as a quarter:
It's tight now. Requires a little more pressure to lock the seat but it's just right.
FYI- that mighty mendit stuff in the pic is awesome.
Last edited: