Valve clearance check

[miso11]

Pictures are deleted. If you want, here is a link for offline version with pictures. Just unzip it and open in some browser.

https://drive.google.com/file/d/1K3s6RGGKlza01t8puNUmgwScB3wBp-rm/view?usp=sharing

 

[Szymon]

Any way or resurrecting the images from this thread.
I want to do this in the next week or so and would like to educate myself on it.

 

[trepetti]

Any way or resurrecting the images from this thread.
I want to do this in the next week or so and would like to educate myself on it.

Pictures or no pictures, take a look at the attached thread about getting the valve timing correct. If you have no trouble with the timing, then you won't need it. But if you have any questions or run into an issue, these instructions REALLY WORK.

Good luck

HELP!!! - with my timing chain

This has always been the bane of my existence. I did my valve check today (no adjustments needed) and for the life of me, i cannot the timing chain installed correctly. I did not remove the cams. Can someone please give me the start to finish steps to get the timing lined up correctly...

www.600riders.com

 

[Szymon]

Thank you.

Just read through the valve clearance check thread.
Along with a Haynes service manual and Yamaha service manual.

The pictures would just be nice to reference but I think I got it covered from the manuals.