Search results

Good day to you all I have another on going project Bringing this neglected bike to life again 2005 FZ6 Blown head gasket no wonder why they've rebuilt the engine not replacing the head gasket instead they used RTV 😂 And 2 sparklug holes stripped sourced another Cylinderhead Lapped the...

Im rebuilding front suspension only replacing the inner tube Allen hex too loose metric or sae Torx way too loose This is the first time ive seen this type of set screw

Ive been wanting to buy a new bike for quite some time Specifically a MT09 after i test ridden a gen 2 Out of nowhere i was asked an offer i cant refuse Its a crashed bike and alot of work is needed Bent one of fork leg Leaking on both forkleg Dented tank Yeah shes in rough condition but not as...

Heres another Fz6 neglected for years being resurrected. Bike wont run compression on all cylinders are ranging 100-120 psi and blowing smoke out of the breather hose We decided to tear it down and replace all pistons rings checked all the bearings and all is good Now its running and lo and...

Ive just finished rebuilding the engine Now im trying to fire it up only to find out fuel pump and injectors have no power Red tracer blue wire has no 12 volts I pulled the ecu and interrupter relay from my running fz6 plug it all in here still no power I plug the ecu and relay from this...

Hey guys im back again No my fz6 isnt broken it still runs fine Sorry i have to post here But what im working on now is 06 gsxr 600 Does anyone here have any idea why this bike wont crank when hot? 220F hot the push start button wont work but if i jump directly to the starter relay the bike...

Another fz6 back on the road and one more to go needing an engine rebuild I cant believe i've got this bikes coming in for repairs Thanks to this forum a lot of tips and tricks from great members here. Just sharing my weekend

My rear suspension leaked And I have decided to rebuild it (Note: this mod is risky if you have the money this not for you) All oil was gone and felt like im riding a pogo stick. Lower mount removal is a pain in the ass, blowtorch and curved vice grip is your friend here Diassembled Forgot to...

Random ticking sound when first start up Sometimes there is no ticking at all. Its gone when the engine is hot but when i parked it and start it hot it ticks Could it be CCT failing? Thanks!

Good day everyone I blew my old rear suspension im looking for a replacement I was wondering if the rear suspension from 2009-2016 fz6r will work for fz6 s1 I cant afford aftermarket rear suspension right now. Thinking of buying used rear suspension from later bike

Stock throttle tube mod Just sharing what a glue and a cable tie can do Ive done a lot of this to different bikes and none of them failed. Do this at your own risk. https://youtube.com/shorts/QmwfSXQx15g?feature=share

Ive owned my FZ6N in less than a year and most of those times was me rebuilding the bike from junk to where it is now. Back from the dead! Lately Ive been eyeing its bigger brother FZ1N I saw one personally but havent ridden one. Im having 2nd thoughts about this because i havent really ridden...

Ok so i encountered this problem twice and i cant seem to find whats causing this. The bike ran fine no jerking or sudden power loss . Bike revs fine and no delay when i twist the throttle It only happens when its hot outside How ever when i let the bike rest for a minute or so, it comes back...

Jsut sharing LED headlight bulb doesnt seem enough Ive installed some cheapo auxlight And wired it with fuse and switch Placing the ballast, relay and fuse is a problem with Naked bikes, now its tight under the tank. That blue bracket is just temporary, its an eye sore

Good day! So my laziness struck me. I did not clean my hose water joint pipe. And it unveiled pitting I noticed a raised temp when sitting in traffic light and in the verge of overheating reached full bars but not blinking (fz6n s1) on a hot summer day around 37deg celsius Went home and checked...

Good day! I noticed a difference between fz6n s1 and s2 regarding the horn location S1 seems to have its horn located in radiator cap side While the s2 is on the other side clutch lever side. Is there anyone have a picture to confirm this? Im going to install new dual horn for my bike, i...

I just thought some might like it 1983 kawasaki KZ1000R Eddie lawson replica The bike that started it all for kawasaki lime green Its one and only here in Philippines

Good day! Im back again with another question Did someone here encountered a problem like mine Error 33 It has spark at all cylinders Injector cyl 1 and 4 is not firing Its running 2 cylinders however when i poured gasoline in cyl 1 and 4 it all of cylinders are firing Ive traced all the wires...

Just thought i'd share this I have a spare time to dig deep into this Im having problem error 33 Ive decided to crack open my ECU Check both of the transistor for igniton coil 1 and 2 Both seems to have same values Havent found whats causing this I'll keep an update to this

Good day! Does anyone here know what is the part number for body harness/loom of FZ6N S1? I want to know if there is a difference between fz6 and fz6n body harness Currently im looking out for parts My chassis number RJ074 2005 FZ6N Body harness/loom Ignition coil set ECU Im having issues with...