Btw, just realized by S1 bracket you probably mean the speedo mount. The speedo mount is not included and needs to be custom made.
I had used a plastic cutting board, which I cut down to size and then drilled holes in the appropriate places to mount it onto the headlight frame at the...
SOLD
I am cleaning out the shed and found another box with some spare parts for the OEM Yamaha FZ16 headlight which is known as the VS02 kit on this forum.
Here is a list of what is included:
Headlight Frame - The frame is new and unmodified. Will need to be modified for your application if...
SOLD
This headlight is from a Yamaha FZ15 (sold in India). It looks like the VS02 kit. I fabricated a speedo mount out of a plastic cutting board, which held up well for the few months I had the headlight on before switching to another setup. I can throw in the fabricated speedo mount.
Note...
If anyone has the front yellow/amber reflectors lying around that they don't need please let me know.
I will pay shipping of course.
Thanks in advance.
Clutch cables hasn't been lubed recently.
I degreased the entire area around the brake pedal.
The blow back oil spot is from when my oil cap came lose a few months ago. Figured oil was good for the metal stand, left it there to function as grease, but it ended up picking up dirt.
I noticed that there is a very small oil leak on the bike the other day. Haven't noticed any drops on the floor, but just running on the metal. I cleaned up the entire bottom of the bike and the only spot I noticed oil when wiping was at the lower hose at the metal connector where the two pipes...
Does anyone know where to find a cheap headlight fairing. The one you usually see with round headlights. A tiny one that is all black would cover the wiring. I might try to fit my VS2 kit fairing with some mods. See how that turns out in the meanwhile.
Yeah. I went over the sharp edges with a sanding block. it is fairly rounded. Not sure there is any space inside/under the tank to pull the wire. I tried pushing it in a little, but than the H4 connector would not make it to the headlight. Maybe I need to build an extension for the H4 and turn...
I was hoping there was an easier solution than that. I wonder if we can source the FZ6n harness, which was meant for the naked model. It should be shorter and fit the stock connectors. Going to try to see if I can find the part number. Do you still have the link you used to find the speedo cover...
This is what I ended up with for speedo mount.
Need to figure out how to hide that wire from the speedo.
Headlight, headlight brackets and turn signals are temporary, to keep the bike on the road.
Any suggestions on what to do with all the harness? Its all over the place behind the...
Can you provide me a link to where you got your headlight?
Also, how did you mount your speedo?
This is how I am going about my speedo mount.
http://www.600riders.com/forum/fz6-streetfighter/56039-need-diy-fz6-speedo-dashboard-opinion-naked-conversion.html
I am moving from VS2 kit to something different. I have sketched out a few designs will see what is feasible as I fabricate. Meanwhile, I have been working on fabricating the dashboard (pics included) to mount the speedo (and may other switches, and a charging port).
Was looking for opinions on...