• Welcome to the Yamaha FZ6 Forums. Member registration disables ads and allows you to post and share. Register Here.

frame paint

Shay06fz6n

New Member
Joined
May 18, 2021
Messages
2
Reaction score
0
Points
1
Location
Dublin
Visit site
Hi, currently in the process of getting my fz6n back on the road after going a couple years unloved. I was thinking of spraying the frame white while I'm at it and wondering has anyone else done this that can tell me the best paint to use?
 

Attachments

  • 20210517_014332.jpg
    20210517_014332.jpg
    867.7 KB · Views: 30
I've always been disappointed with the results of painting the frame of a motorcycle. Paint easily chips and flakes. But I've had great success with powder coating. If you are going to strip the bike down to the frame, then I suggest powder coating.
 
I've always been disappointed with the results of painting the frame of a motorcycle. Paint easily chips and flakes. But I've had great success with powder coating. If you are going to strip the bike down to the frame, then I suggest powder coating.
I was looking into powder coating but want to keep costs down, im really hoping to hear success stories from using spray paint but might be wishful thinking.
 
I think @TownsendsFJR1300 at one point mentioned a spray paint that was _close_ to the existing frame-color (silver), if you wanted to try to keep it the same.

The silver paint I use on my FJR helmet lock bracket(s) is Rust-oleum "7271 Siler Metallic" which is pretty much close to stock.

The below picture is my bracket (painted) on an FJR which I believe has the same color silver as the FZ:

#1 RS, no outlet.jpg
 
The silver paint I use on my FJR helmet lock bracket(s) is Rust-oleum "7271 Siler Metallic" which is pretty much close to stock.

The below picture is my bracket (painted) on an FJR which I believe has the same color silver as the FZ:

View attachment 74198


Zombie thread resurrection, but I just used the 7271 metallic silver rust oleum paint on the radiator-side trim pieces. Have not put them on the bike yet, but they seem to be really 'disco' looking :) . For an old-time rock & roller this might be an issue.....
 
I used a spray can to paint my frame
Exact paint from yamaha
Samurai paint if its available in your country.

Y3* silver metallic
Matte clear to finish it off

Spilled gasoline does not affect the paint
 

Attachments

  • IMG_20211231_110835.jpg
    IMG_20211231_110835.jpg
    5.2 MB · Views: 19
  • IMG_20211231_162657.jpg
    IMG_20211231_162657.jpg
    2 MB · Views: 19
  • IMG_20220329_200350.jpg
    IMG_20220329_200350.jpg
    229 KB · Views: 19
Back
Top