MrMogensen
... That's me!
As title mentions I am in the middle of installing new brake piston seals (have never been done before and had to drain fluid anyways due to new ABM steel-braded brakelines so I might aswell do the whole chabang.
I removed the old seals a little to quickly before I noticed which side was inside/outside on the outer ring. One edge is rounded and the other edge is sharper. I know this design is intented to scrape the sides of the pistions when they are forced outwards to contain brake fluid inside the caliper.
I think I can feel the correct position when using my finger. I just want to be a little more certain
Searched the FZ6 Service Manual without any luck. Loads and loads of pages about calipers, brake piston seals etc. but just nothing as detailed as this.
I removed the old seals a little to quickly before I noticed which side was inside/outside on the outer ring. One edge is rounded and the other edge is sharper. I know this design is intented to scrape the sides of the pistions when they are forced outwards to contain brake fluid inside the caliper.
I think I can feel the correct position when using my finger. I just want to be a little more certain
Searched the FZ6 Service Manual without any luck. Loads and loads of pages about calipers, brake piston seals etc. but just nothing as detailed as this.