Parting out my 2008 FZ6

summerb37

Junior Member
Joined
Jun 26, 2011
Messages
129
Reaction score
0
Points
16
Location
Vancouver, BC
Visit site
Parting out my 2008 FZ6 - No accidents and straight.

Let me know what you are looking for. It's the black version.

Odometer: shy of 66,000K

Engine may require new timing chain.

Low ball offers for whatever part(s) will be ignored. Prices in Canada or equivalent US$


NOTE: Shipping is from Vancouver, BC, Canada. Shipping within/from Canada isn't as cheap as other countries. For example, shipping the Top Sellerie seat by Canada Post to New York (zip 10001) with box weight and dimensions of 35.00 in., Width 18.00 in., Height 15.00 in., Weight 8.000 lb. is $197.49 CAD. To ship it Seattle is $147.30 CAD. To Montreal Quebec is $72.57 CAD

I cannot imagine fedex or ups is cheaper. So, please keep in mind that shipping is not cheap, especially if the item is large.
 

Attachments

  • ODOss.jpg
    ODOss.jpg
    82.1 KB · Views: 45
  • 20220109_125736.jpg
    20220109_125736.jpg
    1.7 MB · Views: 2
  • 20220109_125815.jpg
    20220109_125815.jpg
    903 KB · Views: 2
  • 20220109_125832.jpg
    20220109_125832.jpg
    2.2 MB · Views: 2
  • 20220109_125837.jpg
    20220109_125837.jpg
    1.6 MB · Views: 2
  • 20220109_125902.jpg
    20220109_125902.jpg
    2.9 MB · Views: 3
  • 20220109_125911.jpg
    20220109_125911.jpg
    2.9 MB · Views: 3
Last edited:

summerb37

Junior Member
Joined
Jun 26, 2011
Messages
129
Reaction score
0
Points
16
Location
Vancouver, BC
Visit site
I am looking for the rear grab bar (without tail light ). thanks


Please see attached photos for detail. Given the age of the bike, there are scuffs and marks on the tail and grab handles, but nothing is broken. If you are still interested, where would it be shipped to? I haven't figured out an asking price yet, but will have one if you respond.
 

Attachments

  • 1 Underside.jpg
    1 Underside.jpg
    974 KB · Views: 9
  • 2 RUnderside.jpg
    2 RUnderside.jpg
    1.2 MB · Views: 10
  • 3 LUnderside.jpg
    3 LUnderside.jpg
    1.6 MB · Views: 9
  • 4Top.jpg
    4Top.jpg
    810 KB · Views: 11
  • 5LTop.jpg
    5LTop.jpg
    1.3 MB · Views: 9
  • 6RTop.jpg
    6RTop.jpg
    1.2 MB · Views: 9
  • 7RearTop.jpg
    7RearTop.jpg
    633 KB · Views: 7
  • 8SeatRubWear.jpg
    8SeatRubWear.jpg
    776 KB · Views: 6
  • 9OppositeScuffExample.jpg
    9OppositeScuffExample.jpg
    697.4 KB · Views: 5

summerb37

Junior Member
Joined
Jun 26, 2011
Messages
129
Reaction score
0
Points
16
Location
Vancouver, BC
Visit site
Thank you for responding, I wish to re paint it to the Yamaha Anniversary yellow. I am in Queensland, Australia, thank you

Hi,

If I can get it into a box no bigger than Length 24.00 in., Width 18.00 in., and Height 9.00 in, the cheapest shipping would be $200 CAD, by Canada Post Surface. Xpresspost via Canada Post is about $339 CAD. Other carries are basically in the $600+ range.

If I cannot get it into a box no larger than mentioned above, the cheapest price by Canada post jumps to around $550.

Using ebay pricing for the rear tail section (SEAT REAR Handles & Rear Back Tail Fairing Cowl Trim) without the tail light, I'm asking $400 CAD or equivalent . If you want it, I will confirm whether it will fit it a box size that I mentioned above. It will be close.

PS. If you are really going to paint it yellow, the price goes up by $50 CAD - lol - Joking.
 
Last edited:

trepetti

It's all good!
Elite Member
Site Supporter
Joined
Mar 23, 2012
Messages
1,599
Reaction score
834
Points
113
Location
Northern New Joizey
Visit site
I need some information and perhaps some parts. I have an S1 and I want to relocate the rear brake fluid reservoir to the same place as on the S2. The S1 reservoir is mounted up and to the inside, so that the side of the cap is visible through the triangular hole where the seat and tank meet.

I cannot find the illustrations for the S2 mounting bracket on any parts site. Are you able to take some pictures of the brackets that your rear reservoir attaches to? I know shipping to the US from you is insane, but if I cannot find these parts then buying from you might be my best bet.

Appreciate whatever help you can give me....

Thanks
 

summerb37

Junior Member
Joined
Jun 26, 2011
Messages
129
Reaction score
0
Points
16
Location
Vancouver, BC
Visit site
I need some information and perhaps some parts. I have an S1 and I want to relocate the rear brake fluid reservoir to the same place as on the S2. The S1 reservoir is mounted up and to the inside, so that the side of the cap is visible through the triangular hole where the seat and tank meet.

I cannot find the illustrations for the S2 mounting bracket on any parts site. Are you able to take some pictures of the brackets that your rear reservoir attaches to? I know shipping to the US from you is insane, but if I cannot find these parts then buying from you might be my best bet.

Appreciate whatever help you can give me....

Thanks
 

Attachments

  • 20220612_185401.jpg
    20220612_185401.jpg
    1.5 MB · Views: 6

trepetti

It's all good!
Elite Member
Site Supporter
Joined
Mar 23, 2012
Messages
1,599
Reaction score
834
Points
113
Location
Northern New Joizey
Visit site

Thanks. Not sure the depth of disassembly you plan to go to, but I would be interested in all the bracketing from the reservoir itself all the way up to where it attaches to the frame near the RR.

Let me know it you are open to chat about it.
 

Avin

New Member
Joined
Mar 22, 2020
Messages
14
Reaction score
6
Points
3
Location
India
Visit site
Mate, would be interested in the Fuel Pump assembly, rear tire hugger and the handlebar. Shipping would be for India. Pin code is 571213. Would that be possible.
 

summerb37

Junior Member
Joined
Jun 26, 2011
Messages
129
Reaction score
0
Points
16
Location
Vancouver, BC
Visit site
Shipping from Canada is outrages. You would be looking at approximately $300 for the shipping via International Parcel and 1 -3 months for delivery.
 
Top