R6 fork?

[BAD@SSFord]

So I have ordered some 2004 R6 forks, calipers, and front axle from ebay, got a steal to -$220 shipped for all of it and the calipers have brand new pads in the box, hell yea! Anyways were in the world do I get the shim kit and fender brackets? Any help would be greatly appreciated.

 

[skooter65]

Not sure if these are still available or if the seller will split them up; but it is probably worth and e-mail: R6 Fork Mod Kit with Sharkbait66 Shim Kit - Sportbikes.net

Hope this helps!

 

[BAD@SSFord]

Thank you sir!

 

[SovietRobot]

Shims are easy to find, they're basically washers. The fender brackets are just about impossible unless you make them yourself or buy them from someone who switched back.
I was lucky enough to buy the brackets second hand from a member.

 

[BAD@SSFord]

I ordered a kit from dako81, can't wait to get it and get this beast together, I test rode the bike, bought it, got home and decided it needed tires so I took the wheels off and got new pirelli's put on it, before putting the wheels back on I decided to paint the whole thing flat black, while painting I realized some fork oil so I ordered some r6 forks, r6 brakes, didnt like the round speedo so I ordered an r6 speedo, renthal bars, the 2 wheel levers, messed up my tail light so ordered a LED one, dominator headlights, while it been sitting here wheelless I crank it up and decide I dont like the sound so I ordered some two brothers carbons and a fender eliminator kit. Hell all of this because I didnt like the tires on it, the wheels are still off and I havent registered it yet. Ready to get it back together and hit the streets. I think I am addicted!

 

[Zzzz]

Wow dude.. You must have previously had some serious coin in the bank.

 

[bob808]

You fixed a lot of stuff there... All you need is hydraulic clutch and you're set

 

[lazamus69]

Wow dude.. You must have previously had some serious coin in the bank.

No sheet. Thought you'd be broke fixing your ford....:BLAA:

j/k

 

[BAD@SSFord]

Haha, yea its a ford body and interior, has a dodge cummins in it and rockwell axles, I just like the way the superduty bodies look. I had a little in the bank but I got the bike for 2100 with 11k miles on it, it had been layed down and all it messed up was the front fairing and headlight, luckily I planned on stripping all of that off because I like the streetfighter look.

 

[BAD@SSFord]

But I got lucky with the forks, I got the forks, calipers, front axle, dako's kit and stainless lines for right under $300. The place that I get my tires sells used race tires, new there like 400 but these have been riden on the track and you can get a next to new set for $175 installed, there super sticky tires they just dont last as long.