mookieaz
Junior Member
I got my 2006 FZ6 about two months and have been lurking on the site since trying to pick up some tips from the experienced members. It's been really helpful. Time to pop my cherry with a technical question.
The original owner did some good basic mods, gut I installed frame sliders a couple days ago and since then the rpm's at idle have not been consistent. the motor seems to be surging and dipping a little. From like 1240 up to about 1360 and down to about 1100. It was running steadily at about 1240 to 1300 before I installed the sliders. I torqued the bolts to spec just to be sure and no improvement.
Has anyone had this experience? Any feedback would be great.
Thanks, mike
The original owner did some good basic mods, gut I installed frame sliders a couple days ago and since then the rpm's at idle have not been consistent. the motor seems to be surging and dipping a little. From like 1240 up to about 1360 and down to about 1100. It was running steadily at about 1240 to 1300 before I installed the sliders. I torqued the bolts to spec just to be sure and no improvement.
Has anyone had this experience? Any feedback would be great.
Thanks, mike