tejkowskit
Gold Member
This week I did bd43's headlight mod and also the pod light mod. The dual headlight mod was super easy. So were the pod lights. Here is the link I used for the pod lights. Pod Running Lights - How-To - Sportbikes.net
A few things I did differently: 1. Use crimpable splices instead of stripping insulation and soldering into the turn signal mods. 2. Use the pod lights as running lights ALONG WITH turn signals (I do not have aftermarket signals). To do this, use the BLUE and BROWN wire on the LEFT side and the BLUE and GREEN wire on the RIGHT side. The pod light and stock turn signal will alternate when switched on. Same with the hazard lights. Here is a picture
A few things I did differently: 1. Use crimpable splices instead of stripping insulation and soldering into the turn signal mods. 2. Use the pod lights as running lights ALONG WITH turn signals (I do not have aftermarket signals). To do this, use the BLUE and BROWN wire on the LEFT side and the BLUE and GREEN wire on the RIGHT side. The pod light and stock turn signal will alternate when switched on. Same with the hazard lights. Here is a picture
