Mastanul
New Member
So I’m having this issue with my bike I fully rebuilt the bike. It has a new harness new engine new ECU the kickstand switch it bypass the clutch switch bypass and I have a brand new neutral switch. The bike starts right up, but when I clutch in and I put it in the first gear it dies. I bypassed the neutral switch and I can ride the bike, it rides and shifts awesome no issues, but the bike constantly thinks it’s out of the gear and the n light on my cluster is green. The clutch cable it is adjusted properly. It has fresh oil, no error codes and everything is working. I can’t figure out what’s going on and I would need some help from more experienced people with this bike. so basically the bike is running only if the neutral switch is bypass. runs and shifts awesome what do you think could be wrong and make the bike stall when you put it in the first gear? When i engage the clutch i can see the clutch plates thru the oil fill hole that are separated. I just can not find any information on the internet regarding this type of issue. Any help would be much appreciated!