Need Help Bad idle after warming up

[Motogiro]

What is that "E:" on your readout?

 

[helloimnewtobikes]

What is that "E:" on your readout?

I ran the diaG by pressing simultaneously SELECT + RESET and if i recall correctly d61 showed error code ”30”. ChatGPT said it was something related to the center stand. The previous owner dropped the bike once on a stand and the front body (plastic) is little bit cracked but everything else is like new.

I didn’t know how to reset it so I let it be. Maybe I’ll try to reset it and see if the ”E” comes back?

 

[TownsendsFJR1300]

There are no switches/ electrical anything related/attached to the CENTERSTAND, just the kick stand..

.

 

[helloimnewtobikes]

There are no switches/ electrical anything related/attached to the CENTERSTAND, just the kick stand..

.

Yeah my bad, that’s apparently lean angle sensor.

Edit: Btw how to reset it?

 

[TownsendsFJR1300]

Yeah my bad, that’s apparently lean angle sensor.

Edit: Btw how to reset it?

I believe just standing the bike up, maybe cycling the key...

.

 

[helloimnewtobikes]

I believe just standing the bike up, maybe cycling the key...

.

i’ve never the dropped the bike

 

[grahammarsden]

I ran the diaG by pressing simultaneously SELECT + RESET and if i recall correctly d61 showed error code ”30”. ChatGPT said it was something related to the center stand. The previous owner dropped the bike once on a stand and the front body (plastic) is little bit cracked but everything else is like new.

I didn’t know how to reset it so I let it be. Maybe I’ll try to reset it and see if the ”E” comes back?

The E: nnnn is a digital rev counter.

You get to it by switching the ignition on, then pressing Select so it goes from Odometer/ Trip 1/ Trip 2/ Revs

It's more accurate than the LCD scale around the edge of the display.

To clear old error codes, go to Diag 62 and turn the kill switch to ON.