fazer05
New Member
Is there anyone who had troubles attaching the silencer rubber clamps on the delkevic 200mm. There doesn't seem to be anywhere to mount them to? the cans sit too far forward to be used in the OEM holes for the original exhaust.
delkevic installment how to attach can clamps?
- Joined
- Feb 24, 2011
- Messages
- 2,917
- Reaction score
- 289
- Points
- 83
- Location
- Melbourne Australia
you should have a bracket that the ends of the clamps will attach to.
from memory that bracket attachs where the original exhaust bolted to
the cans stick a fair way out the back
have a read of this archived thread
http://www.600riders.com/forum/archive/index.php/t-51967.html
there might be something handy in there.... the youtube vid is still private unfortunately
from memory that bracket attachs where the original exhaust bolted to
the cans stick a fair way out the back
have a read of this archived thread
http://www.600riders.com/forum/archive/index.php/t-51967.html
there might be something handy in there.... the youtube vid is still private unfortunately
Last edited:
Similar threads
