MasterAtArms
Junior Member
When removing the battery to access the area in the frame, should I remove the battery tray as well?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
When removing the battery to access the area in the frame, should I remove the battery tray as well?
So I've been riding my bike with the dual headlights for about 3 weeks now and burned out one of those bulbs in the dominator headlights. I have it wired from the factory. Is this an indication I need to do the switching mod from moto-giro?
Hmm.. what do you mean when you say "wired from factory"? Factory has low going to one side and high going to the other. I had BD43 wire and ran Dominator for quite a while without ever burning out a bulb (both on at same time, in both low and high mode).
Just plugged it into the factory harness without any modifications.
My lowbeam burned out on me the other day when I posted that. And today my highbeam burned out on the way into work.
Luckily it was light out already.
The wires are still a mess, but I can't do anything with it - I'll just leave it up there
Hi guys
Im really interested in doing this mod for my FZ6n
Im just confused to how you put indicators with this mod?
Hi guys
Im really interested in doing this mod for my FZ6n
Im just confused to how you put indicators with this mod?
Can you post a picture of the connection? My Twin D came with a single in-line male plug.