FZ6 '05 fuel system. HELP/

[astrauskioks]

first of all, hello everybody, im new here ,at these forums. And I wanna tell about my problem , i have yamaha raptor frame ,and have fz6 engine into it, and the question is, how connect fuel hoses, its connected to engine, but how connect them to fuel pump etc, i dunno, i cant find many information about that in internet,or in manuals... somebody could tell me how to do it ? any pictures, or diagrams, schemes? Second question what spark plugs goes to that engine ,longer ,or shoter ones? i really need help, and sorry, if i posted it into wrong section. Thanks ,if somebody helps me out. Sorry for my english too.

 

[Nelly]

first of all, hello everybody, I'm new here ,at these forums. And I wanna tell about my problem , i have yamaha raptor frame ,and have fz6 engine into it, and the question is, how connect fuel hoses, its connected to engine, but how connect them to fuel pump etc, i dunno, i cant find many information about that in internet,or in manuals... somebody could tell me how to do it ? any pictures, or diagrams, schemes? Second question what spark plugs goes to that engine ,longer ,or shoter ones? i really need help, and sorry, if i posted it into wrong section. Thanks ,if somebody helps me out. Sorry for my english too.

Welcome to the forum, Please post some pictures of your bike.
Are you using the FZ6 fuel pump and wiring loom?

If you could also post some pictures off what you are trying to connect that would be really helpful.

You will get some answers here but a little more information is required.,

Good luck
Nelly

 

[Kazza]

+1 on what he said ^^^^^ and :welcome: to the forum

 

[astrauskioks]

okay, thanks for quick reply, i will post pictures later, and the youll help me out .

-Kar

 

[Nelly]

Sorry I forgot to mention the spark plugs are NGK CR9EK

Nelly

 

[FinalImpact]

Sorry I forgot to mention the spark plugs are NGK CR9EK

Nelly

This may not be applicable but the temps in a sand rail/Raptor might be a bit hotter as it likely has less air flow and is totally dependent on the Radiator and cooling fan(s). Might need a colder plug????

Also: If it was a 300cc Raptor it's gonna need a bigger radiator to displace 600cc worth of combustion heat. . . .

Isn't it fun to speculate!!!! :spank:

 

[FinalImpact]

Look here, in the final pages of the service manuals there are electrical schematics. That should help you out.

As for the fuel lines, don't be tricked by the Air Induction System (AIS) hardware. It can be plugged and the valves (reeds) blocked off. Look in the manuals and use the search function for AIS. Most with after market exhaust block this off.


haha - oppsee - forgot the link. . .

http://www.bonemanfz6.com/mods.htm#manuals

Be Sure to THANK Boneman for his efforts!

 

[astrauskioks]

thanks for help, the frame is raptor 660, radiator is exactly same like fz6, i have have fz6 radiator,and raptor's, i will post up pictures, when i will be able to.

 

[astrauskioks]

Hello ,people again, so, im back with my questions, and my little project here :BLAA: AND SORRY FOR MY ENGLISH , i hope you guys will understand what im askin for.

1) okay, where do i connect GREEN ,and RED hoses ?


Full pic : http://www.freeimagehosting.net/48a34

2)Where do i need to connect GREEN ,and RED endings?


Full pic: http://www.freeimagehosting.net/ee691

3)And what hoses should go to fuel pump here? what colour, if there is any of them in previous pictures


Full pic: http://www.freeimagehosting.net/82af6


And here is first look :smoking:

:Flash:
Full pic : http://www.freeimagehosting.net/90213

 

[FIZZER6]

That thing is gonna scream! Best get some new tires on that thing! :BLAA: