clrd_2_lnd
Junior Member
Did the 12v power source thing finally and it came out great, have to thank Stryken for the idea of where to mount and how to mount it, dude it is solid there just like you said, it's as good as if the factory put it there!
Pic 1 - 12v power socket from walmart, some type of screw that is long enough to go through the support in front, I used a screw that had a metric allen head on it and a lock washer with a big washer to keep it from slipping into the large hole in the support.
Pic 2 - Socket has to be all weather.
Pic 3 - Drilled a hole just a hair smaller than the screw.
Pic 4 - Tap the hole with the screw.
Pic 5 - ""
Pic 6 - Put it where you want it, make sure you have clearence from everything in there, like the forks horn ect.
Pic 7 - What it looks like on the otherside.
Pic 8 - Top view.
Pic 9 - Raise the tank.
Pic 10 - 4 things to take off before you can raise the tank all the way, 2 wire connections and 2 fuel type connections.
Pic 1 - 12v power socket from walmart, some type of screw that is long enough to go through the support in front, I used a screw that had a metric allen head on it and a lock washer with a big washer to keep it from slipping into the large hole in the support.
Pic 2 - Socket has to be all weather.
Pic 3 - Drilled a hole just a hair smaller than the screw.
Pic 4 - Tap the hole with the screw.
Pic 5 - ""
Pic 6 - Put it where you want it, make sure you have clearence from everything in there, like the forks horn ect.
Pic 7 - What it looks like on the otherside.
Pic 8 - Top view.
Pic 9 - Raise the tank.
Pic 10 - 4 things to take off before you can raise the tank all the way, 2 wire connections and 2 fuel type connections.