Convict1997
Junior Member
Made some saddlebag supports *updated with bags mounted*
I wanted some way to keep my saddlebags from sagging and possibly hitting the rear tire. I looked around the site and combined a few different ideas. Thought I'd add my solution to the mix. I used 3/8 aluminum rod and rubber covered clamps. I've still got to trim off the forward ends of the rods flush with the clamps and spray a coat of bedliner.
I wanted some way to keep my saddlebags from sagging and possibly hitting the rear tire. I looked around the site and combined a few different ideas. Thought I'd add my solution to the mix. I used 3/8 aluminum rod and rubber covered clamps. I've still got to trim off the forward ends of the rods flush with the clamps and spray a coat of bedliner.
Last edited: