beam

Hi On a longer ride the other day, my head lights stopped working. Here is whats going on: -There is no reactions from the lights on high/low beam using the switch. -But when i press the high beam "flashing" button, one of the high beams turn on! (as long as i press it in.) -Both front...

While riding my high bean indicator comes on and off by itself. When its off the switch works and when it turns on by itself, if i rock the switch on and back off it stays on till it decides to turn back off. I assume the vibration has something to do with it. Also, I have not ridden at night...

I'm looking into buying a new headlight and I can't seem to find where the ground is. Currently there's two wires going from the high beam and two wires going from the low beam. I've attached a picture

So my problem is that since I bought this bike second hand I have had to replace the headlight globe twice as the high and/or low beam burn out almost instantly and now recently the high beam light icon on the dash has stopped illuminating. Also it's had a check engine light on for some...

My -footpeg attachment bracket broke off when I hit a support beam backing out of my carport :(

I have a 2007 FZ6. Apparently this may be a known fault as it has been fixed on the bike before for a previous owner. When i turn the key on it goes through its usual start up procedure on the dash but the blue full beam warning light stays on all the time and I have no headlights. This means...