hose

2006 FZ6 w/~18k miles Background: I have very little experience working with motorcycles, but have been a backyard auto-mechanic most of my life and am comfortable working on engines. This bike sat for almost a year and even though I'd drained and replaced the fuel she still wasn't running...

Question 1: I know an exhaust question gets posted CONSTANTLY; however, I haven't found a super clear opinion on this and before I keep buying mix-matched parts I'd like to find out: I have a 2009 FZ6. If I want to completely get rid of the cats in it I need to replace both the header (has...

I noticed that there is a very small oil leak on the bike the other day. Haven't noticed any drops on the floor, but just running on the metal. I cleaned up the entire bottom of the bike and the only spot I noticed oil when wiping was at the lower hose at the metal connector where the two pipes...

I ordered a Penske 8983 and it arrived today. I got it mounted, but there doesn't seem to be a good place to put the remote reservoir. The 90 degree fitting for the hose makes it such that it cannot go in the storage area under the seat, and unlike this Ohlins install...

Hey folks, Been kept away a while with work but back now and looking to get the bike good to go! I fitted HEL brake hoses yesterday but have a few queries and thought you knowledgable folks could assist. A picture paints a thousand words so I've attached some. I'm fairly confident...

I've been leaking oil for several months now, nothing serious, just a small drip but since the weather is nice, time to take care of the problem. It appears I just need to purchase a new hose clamp and screw, since the stock clamp and screw doesn't tighten any harder. If that's the case, will...

Hey Guys My fuel hose burst and I replaced it with a aftermarket one. But after replacement, the 'feeling' is not the same. Dragging seems rough and not smooth as before. So my question is, does using aftermarket fuel hose affect performance?

Just a couple of tips for doing this: The bar you need is Yamaha part number 2D1-26111-02. This part supersedes 2D1-26111-00 and 01. Note that it is NOT the same part as 2D1-26111-11-do NOT order that one, it is the wrong bar. When installing the new FZ1 bar you will need to drill a...

Ok, So I've started on the Dual Headlight Mod tonight (The bd43 version), and I cam across this: When I lift up the Fueltank, - I see 2 narrow hoses: The Fuel tank breather hose, and The Fuel tank drain hose, BUT .. if I look under the Bike I've got 3 hoses comming out, - 2 of which are...