Hi fellow riders, I'm after a bit of advice on getting a headlight working on my bike.
I bought my 2009 FZ6 naked streetfighter as a more or less completed project and gave it all the finishing touches... Upon buying it it has never had a functional headlight.
It came the the twin vertical...
Okay, I swapped the front turn singals and headlight for leds. I replaced the rear turn signals with sequential turn signals(leds) and yes I replaced the flasher relay with one for the leds. Now here's the weird part I'm struggling with. With the relay hooked up one way, the front signals flash...
Hi all,
I'm coming back to a dual dominator LED headlight mod I was planning to replace my 6n's single globe.
I see much talk around forums recommending use of relays for single to dual headlight projects but I'm wondering if I can splice the two LED together?
I read there could be a...
Been looking for a long time for a good one that will work nicely to eliminate the bulky set up i have now but a lot i'm finding either don't work well or are very questionable to say the least.
So what all have you used and please post pics.
Also if it helps what I'm looking for is a set up...
I've been a lurker on here for a couple years and thought I'd try to finally contribute instead of just sucking knowledge from you guys, so here goes...
As I anxiously await the Michigan weather to warm back up and dry out, I've been tinkering with my bike to pass the time. Yesterday, I...
Can anyone help?
Fitted front led flashers with resistors - work fine.
Bought rear led flashers but not fitted.
Figured a new relay would be easier than siting resistors at the rear end.
Tried new relay before fitting rear led flashers but getting hyper
Flash (even with front...
Have Yamaha OEM LED turn signals (2 still in bags, 2 not with 1 wires cut but still good to go) and Flash Regulator from Super Bright LEDs (this way you don't have to mess with any resistors).
Trying to move quickly as the price shows.
$25 + shipping to any of the 48 states.
Easiest to...
Hi,
I have recently bought a FZ6 S2 2008. There was a known issue included with the purchase. The indicator for the high beam/headlight isn't showing if the headlight is on or not on the dashboard. This is a law here in Sweden that this must be working when the bike is registered/inspected...
Cleaning out the garage.
Have Yamaha OEM LED turn signals (2 still in bags, 2 not with 1 wires cut but still good to go), NIB Motodynamic Clear Sequential Tail light, and Flash Regulator (this way you don't have to mess with any resistors).
Trying to move quickly as the price shows. My...
Hey everyone, just thought I'd pop by and introduce myself.
FZ6-N owner from West London - if there are any locals hit me up if you guys wanna go for a ride sometime.
2006 FZ6-N
Full Akrapovic exhaust
Tail tidy
LED front indicators
Integrated LED brake/rear indicators (smoked lens)...
Unfortunately a lot of the data for the FZ6 is pre-2010. Sellers and products are not in stock or available. What is the recommended fender eliminator? I know the FAZR6 kit allowed you to use the stock turn signals which is cool. I'm not crazy about integrated LED brake/turn signal setups but...
I have a FZ6N, and I am considering replace the original halogen filament headlight bulb with LED bulbs.
The LED bulb is awfully brighter, and consume alot less energy: 25w vs 60w .
But I'm still not sure about one thing: can the reduction in power consumption cause any damage to the...
Hey there !
This is my first post here and I'm in need of some help from you guys :)
Basically , I've ran into a little problem :) . I changed out the stock bulb for a H4 LED Lightbulb on my FZ6 , everything was fine until after about 5 minutes of usage when the LED shut off and started...
I ordered a 7 inch LED projector daymaker LED. And a daymaker 7 inch housing with brackets off eBay yesterday. Waiting for these parts to come in I'm just looking at the bike and trying to figure out where to mail my cluster? Any thoughts or tips for me I was thinking about mounting them on the...
So I recently had the edge to ride my bike and it was almost 0° out of course with my bad luck I put the bike down. So now I'm in the middle of doing a streetfighter rebuild on the bike I recently purchased a 7 inch round LED to mount on the front The original bike obviously had to had lights...
Hey everyone,
I'm looking to replace the halogen bulb in my fz6n with a dual high/low beam LED, just straight conversion, but wanted to ask about it's feasibility. I've found this bulb but am a bit worried about its 50watt draw and whether it actually fit into the bike. By my own looks it...
Just wondering if anyone has tried any of the LED bulb replacements and if they worked okay with our tail/brake lights. I've found a 1156 model that appears to have the same base/current/voltage demands of our stock bulbs.
Looking to change because mine keep burning out. Both filaments this...
New lowered price! Selling my 2006 FZ6 with a clean IL title. Located near CA zip code 92663. I am the second owner. The first owner dropped the bike. I have since replaced the front end plastics but there is a small dent on the left side of the tank. She has lots of modifications but still...
Hi,
I am looking to buy LED bulbs for my bike. I need H4 bi bulbs. Seeing in ebay i see different rating of 35w 60w even 100w. What do i actually need for this or it doesn't matter ?
My bike came with the Clear Alternatives integrated LED tail light, which I don't think is bright enough for braking and definitely not visible enough for turning. I also keep saddlebags on the bike 95% of the time, so I want to mount extra LEDs on the bags.
I plan to use the "Eagle Eye" style...